Skip to main content
logologo
Metal production
SENDZIMIR REV. ROLLING MILL & GRINDER - 370-740 MM - 3.5-0.2 MM

Ref. No.:ROLLMILL140801

YEAR:1977, 1991

Brand:WATERBURY FARREL, LANDIS

Qty:1 Second-hand Sendzimir reversing cold rolling mill

Built:1977 Modernised in 1991 Capacity

Request-offerData Sheet: 
Specification

 

DescriptionSENDZIMIR REV. ROLLING MILL & GRINDER - 370-740 MM - 3.5-0.2 MM
Ref. No.ROLLMILL140801
Year1977, 1991
BrandWATERBURY FARREL, LANDIS
Qty. 1 Second-hand Sendzimir reversing cold rolling mill 
Mfc.Waterbury Farrel Type
Rolling Mill type“ZR – 23M – 31”, reversing “Z”, 1 – 2 – 3 – 4
Built1977 Modernised in 1991 Capacity
Strip width370 – 740 mm Strip tension
ThicknessEntry
Min. exit thickness of material M70-A0.04 mm Last pass from 0.12 to 0.04 mm
Force adjustment55 000 kg Tension
Height of the pass line1070 mm
AGC system Thickness controlled by Gamma system 
Main motor power597 kW, 400/800 RPM
De-coilerDrive power
Qty. 2 Coilers Drive power880 kW, 500/1300 RPM Gear box ratio
Input coils dimensionsI.D. 500 mm O.D. 1 250 mm
Exit coils dimensionsI.D. 500 mm O.D. 1 220 mm
Max. coil weight6 000 kg
Max. coil width770 mm Max. strip gauge
- working roll-110 WR dia.61 mm
Intermediate 1-st rolls dia.89 mm Dia. of driven rolls
- Diameter of thrust bearings225 mm Number of thrust bearings
- back uo rolls first order sets 10 ( 4 rolls in each set) 

- back uo rolls second order-driven sets 10 ( 4 rolls in each set)

 

- back uo rolls second order- not driven sets 10 ( 2 rolls in each set)

 
- back up shafts with bearings -10 sets (four in each) 
- Schneider filter 
- counter weight to the exchange of rolls-2 
Tension max. depending on the material 
- Low carbon steel20.000 Psi High carbon steel
- Brass20.000 Psi Stainless steel (18-8)
- Chrome steel 17% Cr30.000 Psi Nickel
- Al 2 & 3 Series6.000 Psi Al 99.5%
1 Bar = 14.5 Psi 
Qty. 1 Second-hand roll grinder 
Mfc.Landis Type
Roll lengthup to 1500 mm
Qty. 15 Containers