Metal production
EXTRUSION PRESS LINE - 3500 MT - DIA. 343 x 900 MM - 315 BAR
Ref. No.:EXTRUSIONPRL171001
YEAR:1960 - 2013
Brand:ALLEN BRADLEY, 3TC, REXROTH ETC.
Qty:1 Second-hand extrusion press line
Specification
| Description | EXTRUSION PRESS LINE - 3500 MT - DIA. 343 x 900 MM - 315 BAR |
| Ref. No. | EXTRUSIONPRL171001 |
| Year | 1960 - 2013 |
| Brand | ALLEN BRADLEY, 3TC, REXROTH ETC. |
| Subj. | Offer about second-hand extrusion press line – 3500 MT |
| Dear Mr, | |
We have pleasure to provide you with an offer about second-hand extrusion press line | |
| that is immediately for sale. | |
| Qty. 1 Second-hand extrusion press line | |
| Mfc. | 3TC, Allen Bradley, Rexroth, Gautschi, Elhaus, Nederman, Hydrotec, Marx GmbH, |
| Truninger, Ekatech | |
| Force | 3500 MT Built |
| Billet dia. | 343 mm x 900 mm (can be modified 14“ x 1.0 m) |
| Modernisation | |
2011 Complete exchange of control system on press to Allen Bradley Control Logix including | |
| encoders for Ram, Container and Shear. | |
| Change of pump controls to Bosch Rexroth HS4. | |
| 2012 Complete change of hydraulic system (excluding pumps). | |
| New side cylinders and container cylinders. | |
Safety rebuild of press and with change of PLC to Allen Bradley Control Guard Logix L72S (which is the current CPU). | |
Change of control system of billet furnace. Complete new electrical system and integration of logic into the press PLC. | |
| Modernisation of gas burners in the furnace. | |
2013 Change of one of the main pumps to Bosch Rexroth A4VSO355 and new 200 kW, | |
| 1500 rpm motor. | |
| The container heating system is also new! | |
| Specification | |
| Billet furnace | Mfc. |
| Extrusion Press Mfc. | 3TC Built |
| Weight of the press | 340 T Pressure |
| Dia. of the main piston | 1200/460 mm |
| Stroke lengnth of the pressing group | 2120 mm |
| Operation stroke speed – automatic | 0.1-10 mm/sec. remote control |
| Retreat speed | up to 300 mm/sec. |
| Working pressure | 320 kp/cm² |
| Vertical shear Pressing force | 157 Mp Piston dia. |
| Knife speed | 200 mm/sec. Knife stroke |
| Container length | 1.0 m (can be modified 1.1 m) |
| 3 x Bosch Rexroth A2V500 + 250 kW 1000 rpm motor | |
| 1 x Bosch Rexroth A4V355 + 200 kW 1500 rpm ABB motor | |
| PLC system Allen Bradley Control Logix L72S PanelView Plus 1500 | |
| Point I/O with Ethernet I/P | |
| Encoders with SSI for Ram, Container and Shear | |
| New container heating system by Marx Iselohn Control | Panel View Plus 1000 |
| Water quenching unit (tank) Mfc. | TBA |
| Double puller Mfc. | Smith Engineering A/S Built |
| Stretcher | Mfc. |
| Force | 200 kp Chain speed |
| Length of extrusion | 5.7 – 33 m (1.5 m HS stroke) Stroke of cylinder |
| Vertical stroke | 20 – 60 mm |
| Jaw opening | 0 – 350 mm Jaw width |
| Hydraulic power supply Stretching pull | 25 mm/sec. (up to 125 t) |
| Piston return speed | 160 mm/sec. Max. pressure |
| Pump mototr | 45 kW, 3 ph., 380 V, 50 Hz, 1450 RPM |
| Qty. 2 Dies Furnaces Mfc. | Gautschi Built |
| Cutting chips unit Mfc. | Nederman Built |
| Scrap system Mfc. | Ekatech System Industrieautomatik |
| Container pre-heating oven | |
| Container crane | |
| Note | Press had some cracks and it has been welded and made ultrasonic test! |