Ref. No.:FOUNDRYAL230801
YEAR:2000 - 2008
Brand:ZAM Kety, Konwent, Remix, Foseco
Qty:1 Second-hand aluminium foundry – still on foundation!
Capacity:1,500 kg & 2,500 kg
Description | Second-hand aluminium foundry – still on foundation |
Ref. No. | FOUNDRYAL230801 |
Year | 2000 - 2008 |
Brand | ZAM Kety, Konwent, Remix, Foseco |
Qty. 1 Second-hand aluminium foundry – still on foundation | |
Mfc. | ZAM Kety, Konwent, Remix, Foseco (Poland) |
Scope of supply | |
1) GRID-FREQUENCY INDUCTION FURNACE PIT 1500 | Mfc.: ZAM Kety (Poland),Year of production: 2002, Frequency: 50 Hz, Usable loading capacity: 1,500 kg, Total capacity: 1,900 kg, Active power: 500 kW, Rated voltage: 500 V, Inductor current: 7.05 kA, Inductor connection system: single-phase, Power factor after compensation: min 0.99, Specific energy consumption (700°C): 580 kWh/t ±10%, Melting capacity (700°C): 860 kg/h ±10%, Furnace rated temperature 800°C |
2) MEDIUM-FREQUENCY INDUCTION FURNACE PIT 2500 | Mfc.: ZAM Kety (Poland), Year of production: 2000, Frequency: 250 Hz, Usable loading capacity: 2,500 Kg, Total capacity: 2,900 Kg, Outlet power: 1,250 kW, Supply voltage: 3 x 1,350/780 V+PE, Inductor voltage: 2,000 V, Inductor connection system: three-phase, Specific energy consumption (720°C): 565 kWh/t ±5%, Melting capacity (720°C): 2,200 kg/h ±5%, Furnace rated temperature: max 850°C |
3) Kowent MB-M-(20) B sweep dust collector | Mfc.: Konwent (Poland), Year of production: 2001, Capacity: 20,000 m3/h, Dust removal efficiency: 90-98%, Flow resistance: 1,000 - 2,400 Pa (100 - 240 mm H2O), Supply water pressure to the dust collector: 0.15 MPa (1,5 kG/cm2), Power of the sludge scraper gear motor drive: 0.75 kW, Supply voltage: 220/380 V, Allowable underpressure in the dust collector: 4,000 Pa (400 mm H2O) |
4) Holding furnace Remix BSG-10/15 | Mfc.: Remix (Poland), Year of production: 2008, Max capacity: 15,000 kg, Furnace rated temperature: 900°C, Total power of the burners: 900 kW, Fuel: Natural gas, Min supply gas pressure: 200 mbar, Installed power: 15 kW |
5) Foseco FDU MARK 10 refining unit | Mfc.: Foseco (Germany), Year of production: 2002, Working pressure: 6 bar, Maximum rotor speed: 490 Rpm, Refining gas flow: 20-25 dm3/min, Installed power: 2 kW |