Metal production
ALUMINIUM CONTINUOUS STRIP CASTER - 1350 MM - 4.2 MM -
Ref. No.:CASTERSTRIP170101
Brand:MC-410
Qty:1 Second-hand Twin-Roll aluminium strip caster
Specification
| Description | ALUMINIUM CONTINUOUS STRIP CASTER - 1350 MM - 4.2 MM - |
| Ref. No. | CASTERSTRIP170101 |
| Year | |
| Brand | MC-410 |
| Qty. 1 Second-hand Twin-Roll aluminium strip caster | |
| Manufacturer | Castal Ltd. Built |
| Type | MC-410 1350 mm Twin-Roll Aluminum Continuous Strip Caster |
| Cast Strip Width | 1350 mm max 53.15" |
| Cast Strip Thickness Max. | 12.0 mm .472" Min. |
| (4.2 mm achieved by production, not just design capacity) | |
| Casting Speed | 1050 alloy = 1.5 mton/hr achieved 3003 alloy = 900 kg/hr achieved |
| Caster Configuration Horizontal | 15 degree tilt |
| Scope of supply | |
| - Melting & Holding Furnaces 12 mton tilting type Scrap charge car | |
| - Molten Metal Level Pour System Titanium-Boron Grain Refiner Rod Feeder | |
| - Tips 2 sets of tip tables included | |
| Electric tip bake-out furnace | |
| Material for 30 hard and 20 soft tips included | |
| MC-410 continuous strip caster | |
| - Cylinders Hydraulic tilting type | |
| - Drive Siemens DC motor Single drive type Flender gearboxes | |
| - Rolls 2 pairs included 660 mm dia. x 1450 mm face | |
| Akers internal H2O-cooled type Bottom shell of each set = cracked | |
| Cores = perfect condition Chocks & bearings included | |
| - Electrics and Controls Siemens PLC and SCADA system | |
| Central control for complete systems Drawings included | |
| - Pinch Roll Stand Hydraulic, Siemens DC motor, Flender gearbox | |
| - Shear Hydraulic traveling type Fully automatic | |
| Limit switch control | |
| - Strip Feeder Feeds strip into coiler | |
| - Recoiler Hydraulic action Coil push-off | |
| Coil car | |
| - Other Equipment Included | |
| - Uninterruptible Power Supply GE system | |
| - Spectrometer Arun type design, 24 channels | |
| - Heat Exchanger Alfa Laval H2O cooling system | |
| Maintains roll skin temp at 80-85 degrees | |
| Condition Very good Installed and can be dry run during inspection | |
| Maintenance has been diligent Decommissioning was done with care. | |
| - Edge Trimmer Not installed but there is space to install a system |