Metal production
TWIN-ROLL ALUMINIUM CONT. STRIP CASTER - 1350 MM - 4.2-12 MM
Ref. No.:CASTERL160301
Brand:CASTAL LTD.
Qty: 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line
Specification
| Description | TWIN-ROLL ALUMINIUM CONT. STRIP CASTER - 1350 MM - 4.2-12 MM |
| Ref. No. | CASTERL160301 |
| Year | |
| Brand | CASTAL LTD. |
| Qty. 1 Second-hand Twin-Roll Aluminium Continuous Strip Caster Line | |
| General information | |
| ALLOYS | 1xxx, 8011 and 3003 on this caster with good results at the cold rolling mill stage. |
| INSPECTION | The line can be inspected under power. |
| TRIAL CAST | They cannot cast a trial coil. Some movement of the equipment can be seen. |
| ISSUES | The launder lining will need to be replaced (which has to be done when it is moved |
| anyway). The bottom caster roll shell is damaged and needs to be replaced. | |
| The good news is that the roll core (the expensive part) is in excellent condition. | |
| DISMANTLING | 2-nd week of April, 2016 |
| Mfc. | CASTAL Ltd. Strip width |
| Strip thickness | max. 12.0 mm – 0.472” min. 4.2 mm – 0.165” achieved! |
| Casting speed | 1050 alloy – 1.5 MT / h achieved 3003 alloy – 900 kg/h achieved |
| Caster configuration | Horizontal – 15 degree tilt |
| Scope of supply | |
| Qty. 2 Melting / Holding Furnaces 12 MT tilting type Scrap charge car | |
| Molten Metal Level Pour System Titanium-Boron Grain Refiner Rod Feeder | |
| Tips Qty. 2 sets of tip tables are included Electric tip bake-out furnace | |
| Material for 30 hard and 20 soft tips included | |
| Caster Cylinders Hydraulic tilting type | |
| Drive Siemens DC motor Single drive type Flender gear box | |
| Rolls Qty. 2 pairs included 660 mm dia. X 1450 mm face | |
| Akers internal H2O –cooled type Bottom shell of each set – cracked | |
| Cores – perfect condition Chocks & bearings included | |
| Electrics & Controls Siemens PLC and SCADA System Central control of all systems | |
| Edge trimmer Not installed, but there is space to install a system | |
| Pinch roll stand Hydraulic – Siemens DC motor – Flender gearbox | |
| Shear Hydraulic traveling type Fully automatic Limit switch control | |
| Strip feeder Feeding the strip into coiler | |
| Recoiler Hydraulic system Coilpush-off Coil car | |
| Uninterruptible power supply GE system | |
| Spectrometer Arun type design 24 channels | |
| Heat exchanger Alfa Laval H2O cooling system | |
| Maintains roll skin temperature at 80 – 85°C | |
| Condition | Very good Installed and can be dry run during inspection |
| Maintenance has been diligent | |
| Please advise if further information is requested. |