Metal production
HAMMER FORGING PRESS - WATER HYDRAULIC - 120 MN - 4000 x 9000 x 600 MM - WxLxH
Ref. No.:PRESS200701
Brand:SKODA TS
Qty:1 Second-hand vertical water hydraulic hammer forging press
Specification
| Description | HAMMER FORGING PRESS - WATER HYDRAULIC - 120 MN - 4000 x 9000 x 600 MM - WxLxH |
| Ref. No. | PRESS200701 |
| Year | |
| Brand | SKODA TS |
Qty. 1 Second-hand vertical water hydraulic hammer forging press | |
| Mfc. | SKODA TS Built |
| Type | Water Hydraulic hammer forging press CKV 84/105 MN (90/120 MN ) |
| Nominal power I.,II.,III.stages | 30/60/90 MN Nominal power by multiplying |
| Working pressure of water emulsion | 32 MPa |
| Working pressure of water emulsion by multiplying | 43 MPa |
| Working pressure of oil control | 15 MPa Working pressure feeding loop |
| Power of reversing cylinder | 5.4 MN Power of compensatory cylinder |
| Power of longitudinal shift | 2.7 MN |
| Power of exchange device for lower holder swage | 0.64 MN |
| Lift of the press | 3000 mm Lift of move |
| Lift of exchange device for lower holder swage | 3600 mm |
| Pillar span | 2800 x 7000 mm Press calibre |
| Calibre amongst stricture on the pillar | 1600 x 600 mm |
| Width upper transom | 3000 mm Width forging desk |
| Length forging desk | (3 x 3000) 9000 mm Height forging desk |
| Moving velocity | 300 mm/sec Pressing velocity |
| Punning velocity (III.stage) | 70 mm/sec Punning velocity by multiplying |
| Punning lift | 1650 mm Reversing velocity |
| Longitudinal move velocity | 400/100 mm/sec |
| Velocity of exchange device for lower holder swage | 150 mm/sec |
| Claping capacity of upper holder | 1.2 MN |
| Lift quantity by lifting 100 – 200 mm | 6 - 8 per min (III.stage) |
| Lift quantity by smoothen 15 – 25 mm | 40 - 50 per min (III.stage) |
| Maximal allowable excess by forging | with power 120 MN…..250 mm |
with power 90 MN…..300 mm with power 60 MN…..500 mm | |
| with power 30 MN…..1000 mm | |
| Maximal allowable axis distance in the middle of press by thorn forging | 3000 mm |
| Press height above the base | 17800 mm Mass of moving parts |
| Press weight | 3 020 000 kg Electrical power |
| Weight of one pillar | 1165 t Stress under one pillar |