undefined

SLITTER - 1830 MM - 0.6-9.5 MM - MIN. WIDTH 13 MM

Description SLITTER - 1830 MM - 0.6-9.5 MM - MIN. WIDTH 13 MM
Ref. No. SLITTER200704
Year TBA
Brand CINCINNATI
Qty. 1 Second-hand slitting line
Mfc. Cincinnatti Type
Materials HRS, CRS, Galvanised steel
Width Range 305 – 1830 mm, 12" - 72" Thickness
Max. Shear 45,000 PSI Max. Yield
Max. Coil Weight 27 T, 60,000# Entry ID
Exit Coil I.D. 508-590 mm, 20" & 24" Max. Coil OD
Line Direction Left to Right Mode of Operation
Required Floor Space 15 x 27 m, 50' x 90' (approx.)
Consisting of the following
-Entry Turnstile Three (3) arms x 27 T, 60,000# per arm Powered Rotation
Slotted for C-Hooks
-Entry Coil Car Mast Type Floor Mounted Self-contained Hydraulic Unit
Powered Lift and Traverse Cable Reel
-Uncoiler Single Mandrel Type Powered Expansion Feed-up Drive
Hold-down with Powered Snubber Roll Wichita Water Cooled Brake with Cooler
Slide Base
-Entry Unit Extending Blade Type Peeler Entry Pass-line Roll
Manual Side Guides Powered Entry Pinch Rolls Crop Shear- Down-cut Type
Carry-over Table
-Two (2) Slitter Heads Crane Removable Type 254 mm, 10" Diameter Arbors
Powered Outboard Retraction Powered Top Arbor Adjust
"Over the Arbor" design to slit 36" through 72" widths
-Stationary Slitter Drive Base 75 HP DC Motor (650/1950 RPM)
H & S Speed Reducer (27.43 1 Ratio) Powered Head Lock
-Pit Section Mounted to Tension Stand Entry Pass-line Roll
Carry-over Table
-Tension Stand Coil Pro, New in 2000 Drag Type Clam Shell Opening
Separator Arm on Slide-out Frame Internal Deflector Rolls
Exit Crop Shear- Down-cut Type Recoiler Feed Table
-Two (2) Scrap Winders Automatic Scrap Dump Level Wind
-Recoiler Chicago Recoiler Drum, New in 2008 508 mm, 20" Dia. Drum
Hydraulic Expansion and Gripper Hydraulic Push-off 100 HP DC Motor (650/1950 RPM)
Drive-all Reducer with three (3) speeds Bolt-on Risers for 590 mm, 24" ID
-Overarm Separator Assembly Floor Mounted Banding Assist Arm
-Exit Coil Car Mast Type Floor Mounted Self-contained Hydraulic Unit
Powered Lift and Traverse Narrow Coil Retaining Tracks Cable Reel
-Entry Turnstile
Two (2) arms x 27 T, 60,000# per arm Powered Rotation Powered Push-off
Slotted for C-Hooks
-Electrical Controls New in 2006 Main Operators Control Panel with Touch Screen Control
AC/DC Control Cabinets Eurotherm 590+ DC Drives
-Hydraulic System
-Tooling Shimless Multiple sets of Tooling Knives
25.4 mm, 1" Knives new in 2019 (never used) Steel Spacers Rubbers
Separator Tooling
-New AC/DC Controls were added in 2006
-New Chicago Recoiler Drum was added in 2008
-Line is installed

Download Data Sheet         Print Data Sheet                 Request Offer